PB33A concrete placing boom Product Features1.Four arms design, “R” folding. The machine is fully driven by hydraulic, both folding and unfolding are flexible, and can slew 360°with wide working range. Arms adopt high strength s
1.Four arms design, “R” folding. The machine is fully driven by hydraulic, both folding and unfolding are flexible, and can slew 360°with wide working range. Arms adopt high strength steel plate which is stronger and lighter.
2.Two modes of operation: wireless remote control and cable remote control can be selected according to the need. And it can be changed quickly to another system when a system fails to continue the construction.
3.Inner-climbing frames: floor frame or wall (lift or shaft) frame, which are suitable for different jobsites. The machine climbs with its climbing device, which is easy and convenient.
4.Total weight is 2-3 tons lighter than other same level products, which is beneficial to floor bearing.
5.The hydraulic pump station and electric control cabinet are integrated on the base, which is convenient to install and reduces the failure rate.
Max radius of placing boom (m)
Stationary height (m)
Slewing range (°)
Power of motor (kW)
Pressure of hydraulic system (MPa)
Type of hydraulic oil
Arms length (m)
Boom articulation (°)
Min interval of climbing frame (m)
Delivery pipe diameter （mm× mm）
Delivery hose diameter （″×mm）
Mode of operation
1. Cable remote control
2. Radio remote control
Wind speed (m/s)
Max lifting capacity（kg）
Working temperature (o C)