Product Features 1. Our products adopt imported high strength steel plate, whose yield strength is above 900MPa, and it is nearly three times of the general steel plate. The steel plates we used
1. Our products adopt imported high strength steel plate, whose yield strength is above 900MPa, and it is nearly three times of the general steel plate. The steel plates we used in our arm have been 100% nondestructive tested.
2. State switching protection: When the transmission shaft rotates, the pumping and driving state can’t be switched.
3. Gear protection: The motor must hang five gears when pumping(chassis matched).When hanging the wrong gear, the motor can’t speed into the working state.
4. Motor overspeed protection: To protect the main oil pump from damage, our CPU set soft limitation, so the speed of our motor won’t exceed the maximum operating speed.
5. Our products have various functions, such as GPS positioning, intelligent monitoring system, real-time monitoring of working conditions, sound-light alarm, fault self-diagnosis system and mechanical, electrical and hydraulic safety facilities.
6. Unique technology: Our products are equipped with proprietary return sleeves to prevent backflow. When maintaining equipment, we don’t need to pump hydraulic oil, so it saves time and reduces secondary pollution sources.
7. Our products have first-rate pumping unit, and no accumulation would be left in the hopper, so the suction efficiency have been increased more than 8%.
8. Our products have anti-pump function, which can quickly remove clogging and makes it convenient to clean hopper.
9. Our pipes adopt imported wear-resistant material, so their life have reached the advanced level of truck-mounted arm pump in the world.
|Model||TP58RZ6||Cab with air conditioner|
|Total Weight (kg)||42900kg||Wheelbase||1st wheel base||2020|
|Max.travel speed (km/h)||85km/h||2nd wheelbase (mm)||4280mm/ 1350 mm|
|Grade ability||27%||Wheeltread||Frontwheel (mm)||2065 mm|
|Appearance||Overall length (m)||14.06m||Rearwheel (mm)||1850 mm|
|Overall width (mm)||2550mm||Wheel size||Front wheel||11.00-20-16PR|
|Overall height (mm)||3990mm||Rear wheel||11.00-20-16PR|
|Minimum ground distance (mm)||280mm||Minimum turning diameter (m)||12.95m|
|Model||BENZ||Braking length (m/ km/h)||9.5m/30km/h|
|Chassis model||ACTROS4141||Maximum ground distance (m)||58m|
|Drive type||8×4||Delivery linediameter (mm)||Φ125mm|
|Gearbox||Length of end hose(m)||3m|
Pumping mode and
|Drive Mode||Hydraulic Type||1st Arm||Length (mm)||11900mm|
|Oil cylindersize (mm×mm)||Φ150 mm×2000 mm||Articulation||90°|
|Φ260 mm×2000 mm||2nd Arm||Length (mm)||9520mm|
|Concrete valve||S valve（260）||Articulation||180°|
|Theoretic output (m3/h)||low pressure 180m3/h||3rd Arm||Length (mm)||9000mm|
|high pressure 95 m3/h||Articulation||180°|
|high pressure10.7MPa||4th Arm||Length (mm)||11500mm|
|System oil pressure (MPa)||32MPa||5th Arm||Length (mm)||7580mm|
|Hopper capacity (m3）||0.7m3||Articulation||220°|
|high pressure 16 times/minute||6th Arm||Length (mm)||4500mm|
|low pressure 28 times/minute||Articulation||110°|
|Feeding height (mm)||1500mm||Slewing range||±270°|
Main hydraulic pump
|260mL||Horizontal reach (m)||54m|
Cable remote control/Radio